Components
COMPONENTS
ILLUSTRATION
|
*1 | ELECTRICAL KEY ANTENNA |
*2 | REAR BUMPER ASSEMBLY |
Installation
INSTALLATION
PROCEDURE
1. INSTALL ELECTRICAL KEY ANTENNA
(a) Engage the guide and install the electrical key antenna with the nut.
NOTICE:
Be careful when installing the electrical key antenna. If the electrical key antenna is dropped, replace it with a new one.
(b) Connect the connector.
2. INSTALL REAR BUMPER ASSEMBLY
Click here
Removal
REMOVAL
PROCEDURE
1. REMOVE REAR BUMPER ASSEMBLY
Click here
2. REMOVE ELECTRICAL KEY ANTENNA
| (a) Disconnect the connector. |
|
| (b) Remove the nut. |
|
(c) Disengage the guide to remove the electrical key antenna.
NOTICE:
Be careful when removing the electrical key antenna. If the electrical key antenna is dropped, replace it with a new one.
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Electronically Controlled Brake System(for Gasoline Model): Yaw Rate Sensor (C1234,C1472,C1474)
DESCRIPTION The skid control ECU (brake actuator assembly) receives signals from the yaw rate and acceleration sensor (airbag sensor assembly) via CAN communication. HINT: If there is a malfunction in the bus lines between the yaw rate and acceleration sensor (airbag sensor assembly) and the CAN com ...
