Replacement
REPLACEMENT
PROCEDURE
1. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Click here
2. REMOVE LUGGAGE COMPARTMENT LIGHT BULB
| (a) Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the shade from the No. 1 luggage compartment light lens. |
|
(b) Remove the luggage compartment light bulb from the No. 1 luggage compartment light lens as shown in the illustration.
|
Remove in this Direction |
3. INSTALL LUGGAGE COMPARTMENT LIGHT BULB
(a) Install the luggage compartment light bulb to the No. 1 luggage compartment light lens as shown in the illustration.
|
Install in this Direction |
| (b) Engage the 4 claws to install the shade to the No. 1 luggage compartment light lens. |
|
4. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Click here
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Airbag System(for Gasoline Model): Check Mode Procedure. Data List / Active Test. Diagnostic Trouble Code Chart
Check Mode Procedure CHECK MODE PROCEDURE CHECK MODE (SIGNAL CHECK): DTC CHECK (a) Turn the engine switch off. (b) Connect the Techstream to the DLC3. (c) Turn the engine switch on (IG). (d) Turn the Techstream on. (e) Enter the following menus: Body Electrical / SRS Airbag / Utility / Signal Check. ...