Toyota Avalon (XX50): Back Door Courtesy Switch

Components

COMPONENTS

ILLUSTRATION

*1	LUGGAGE COMPARTMENT DOOR COVER	*2	LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY
	N*m (kgf*cm, ft.*lbf): Specified torque		MP grease

Inspection

INSPECTION

PROCEDURE

1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

(a) Check the operation of the door lock motor.

(1) Move the door lock to the close (lock) position.

*a Close (Lock) *b Open (Unlock) *c Component without harness connected (Luggage Compartment Door Lock Assembly)

(2) Apply auxiliary battery voltage to the door lock motor and check the operation of the door lock motor.

OK:

Auxiliary Battery Connection	Result
Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2	Luggage compartment door lock motor open (unlock) operation

If the result is not as specified, replace the luggage compartment door lock assembly.

(b) Check the operation of the luggage compartment door courtesy switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
2 - 3	Closed (Locked)	10 kΩ or higher
2 - 3	Open (Unlocked)	Below 1 Ω

If the result is not as specified, replace the luggage compartment door lock assembly.

Installation

INSTALLATION

PROCEDURE

1. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

Click here

2. INSTALL LUGGAGE COMPARTMENT DOOR COVER

Click here

Removal

REMOVAL

PROCEDURE

1. REMOVE LUGGAGE COMPARTMENT DOOR COVER

Click here

2. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

Click here