Toyota Avalon (XX50): Door Courtesy Light Bulb

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Vehicle Interior / Lighting (int) / Door Courtesy Light Bulb

Replacement

REPLACEMENT

CAUTION / NOTICE / HINT

HINT:

Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.

PROCEDURE

1. REMOVE COURTESY LIGHT ASSEMBLY

Click here

2. REMOVE COURTESY LIGHT BULB

(a) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the courtesy light housing with the courtesy light cover as shown in the illustration.

*a	Protective Tape
	Remove in this Direction

(b) Remove the courtesy light cover from the courtesy light housing as shown in the illustration.

Remove in this Direction

3. INSTALL COURTESY LIGHT BULB

(a) Install the courtesy light bulb to the courtesy light housing as shown in the illustration.

Install in this Direction

(b) Install the courtesy light cover to the courtesy light housing as shown in the illustration.

Install in this Direction

4. INSTALL COURTESY LIGHT ASSEMBLY

Click here

Console Box Light

Door Courtesy Light

See More:

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Electronically Controlled Brake System(for Hv Model): Malfunction in Motor (C1427). Motor Circuit (C1428). Steering Angle Sensor Power Source Voltage (C1432)
Malfunction in Motor (C1427) DESCRIPTION When the power switch is on (READY), the stop light switch assembly off and the vehicle speed is 20 km/h (12 mph) or more, the skid control ECU (brake booster with master cylinder assembly) performs a self-diagnosis of the ABS motor relay circuit during the i ...