Components
COMPONENTS
ILLUSTRATION
|
*A | for Driver Side |
*B | for Front Passenger Side |
|
*1 | COURTESY LIGHT ASSEMBLY |
*2 | FRONT DOOR ARMREST COVER SUB-ASSEMBLY |
|
*3 | FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY |
*4 | FRONT DOOR TRIM BOARD SUB-ASSEMBLY |
|
*5 | FRONT DOOR TRIM POCKET COVER |
*6 | MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL |
|
*7 | POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL |
- | - |
Inspection
INSPECTION
PROCEDURE
1. INSPECT FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH
| (a)
Apply auxiliary battery voltage to the front door inside handle
illumination light assembly LH and check that the lights illuminate. OK: |
Measurement Condition |
Specified Condition | |
Auxiliary battery positive (+) → 1 (+) Auxiliary battery negative (-) → 2 (-) |
Inside handle lights illuminate |
If the result is not as specified, replace the front door inside handle illumination light assembly LH. |
 |
|
*a | Component without harness connected
(Front Door Inside Handle Illumination Light Assembly LH) | | |
2. INSPECT FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY RH
| (a)
Apply auxiliary battery voltage to the front door inside handle
illumination light assembly RH and check that the lights illuminate. OK: |
Measurement Condition |
Specified Condition | |
Auxiliary battery positive (+) → 1 (+) Auxiliary battery negative (-) → 2 (-) |
Inside handle lights illuminate |
If the result is not as specified, replace the front door inside handle illumination light assembly RH. |
|
|
|
*a | Component without harness connected
(Front Door Inside Handle Illumination Light Assembly RH) | | |
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. INSTALL FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY
(a) Engage the 7 claws.
(b) Engage the 5 clamps to install the front door inside handle illumination light assembly.
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
Click here
3. INSTALL COURTESY LIGHT ASSEMBLY
Click here
4. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side)
Click here
5. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side)
Click here
6. INSTALL FRONT DOOR TRIM POCKET COVER
Click here
7. INSTALL FRONT DOOR ARMREST COVER SUB-ASSEMBLY
Click here
8. INSPECT POWER WINDOW OPERATION
for Gasoline Model:
Click here
for HV Model:
Click here
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE FRONT DOOR ARMREST COVER SUB-ASSEMBLY
Click here 
2. REMOVE FRONT DOOR TRIM POCKET COVER
Click here
3. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side)
Click here
4. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side)
Click here
5. REMOVE COURTESY LIGHT ASSEMBLY
Click here
6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY
Click here
7. REMOVE FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY
| (a) Disengage the 5 clamps. | |
(b) Disengage the 7 claws to remove the front door inside handle illumination light assembly.
