Toyota Avalon (XX50): Child Restraint Seat Anchor Bracket

Components

COMPONENTS

ILLUSTRATION

*A	for Gasoline Model	*B	for HV Model
*1	CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH	*2	CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH
*3	REAR CENTER SEAT OUTER BELT ASSEMBLY	*4	REAR SEAT CUSHION ASSEMBLY
*5	REAR SEAT CUSHION LOCK HOOK	-	-
	Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf)	●	Non-reusable part

Installation

INSTALLATION

PROCEDURE

1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

(a) Temporarily install the child restraint seat anchor bracket sub-assembly LH with the 2 bolts.

(b) Fully tighten the bolt (A), and then the bolt (B) to install the child restraint seat anchor bracket sub-assembly LH.

Torque:

19.5 N·m {199 kgf·cm, 14 ft·lbf}

(c) Engage each clamp.

2. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

3. INSTALL REAR SEAT CUSHION LOCK HOOK

Click here

4. INSTALL REAR SEAT CUSHION ASSEMBLY

Click here

5. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

Click here

Removal

REMOVAL

PROCEDURE

1. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

Click here

2. REMOVE REAR SEAT CUSHION ASSEMBLY

Click here

3. REMOVE REAR SEAT CUSHION LOCK HOOK

Click here

4. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

(a) Disengage each clamp.

(b) Remove the 2 bolts and child restraint seat anchor bracket sub-assembly LH.

5. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.